low cost glass passivated junction low leakage low forward voltage drop high current capability case:jedec a-405,molded plastic terminals: axial lead ,solderable per mil- std-202,method 208 polarity: color band denotes cathode weight: 0.008 ounces,0.23 grams mounting position: any ratings at 25 ambient temperature unless otherwise specified. single phase,half wave,60 hz,resistive or inductive load. for capacitive load,derate by 20%. units maximum recurrent peak reverse voltage v rrm 100 200 400 600 800 1000 v ma x imu m rms v o lt ag e v rms 70 140 280 420 560 700 v maximum dc blocking voltage v dc 100 200 400 600 800 1000 v maximum average forw ard rectif ied current 9.5mm lead length, @t a =75 peak f orw ard surge current 8.3ms single half-sine-w ave superimposed on rated load @t j =125 ma x imu m r e v e r s e c u r r e n t @t a =25 at rated dc blocking voltage @t a =100 maximum reverse recovery time (note1) t rr 250 ns typical junction capacitance (note2) c j pf typical thermal resistance (note3) r ja <d operating junction temperature range t j storage temperature range t stg 55.0 maximum instantaneous f orw ard voltage at 1.0a v f 100.0 5.0 500 150 12.0 v 30.0 50 fr101gl FR102GL fr103gl fr104g l fr105g l fr106g l fr107gl 35 50 1.0 3.thermal resistance junction to ambient a i r i fsm note: 1. measured with i f =0.5a, i r =1a, i rr =0.25a. 2. measured at 1.0mhz and applied rev erse v oltage of 4.0v dc. a - 55 ---- + 175 - 55 ---- +175 1.3 a easily cleaned with alcohol,isopropanol and similar z solvents i f(av) voltage range: 50 --- 1000 v current: 1.0 a a - 405 the plastic material carries u/l recognition 94v-0 maximum ratings and electrical characteristics dimensions in millimeters fr101gl-fr107gl glass passivated rectifiers features m echani cal d ata http://www.luguang.cn mail:lge@luguang.cn
amperes amperes fig.4 --peak forward surge current average forward rectified current fig.1 -- test circuit diagram and reverse recovery time characteristic ambient temperature, instantaneous forward current set time base for 50/100 ns/cm fig.2 -- typical forward current derating curve fig.3 -- typical instantaneous forward characteristics notes:1.rise time = 7ns max.input impedance =1m . 22pf. jjjj 2.rise time =10ns max.source impedance=50 . instantaneous forward voltage, volts fig.5 -- typical junction capacitance peak forward surge current amperes junction capacitance,pf reverse voltage,volts number of cycles at 60hz 10 n 1. 1 nonin- ductive 50 n 1. (+) 25vdc (approx) (-) d.u.t. pulse generator (note2) oscilloscope (note 1) t rr -1.0a 1cm -0.25a 0 +0.5a 0 0.1 1.0 10 t j =25 pulse width=300 s 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 2 0.01 1 2 4 6 10 20 40 60 100 200 0.1 0.2 0.4 1 2 4 10 40 100 20 t j =25 0.25 1.25 25 50 75 100 125 150 0 175 0.50 1.00 0.75 single phase half wave 60hz resistive or inductive load 0 10 30 11 01 0 0 5 8.3ms single half sine-wave 50 20 40 50 fr101gl-fr107gl glass passivated rectifiers ratings and charactieristic curves http://www.luguang.cn mail:lge@luguang.cn
|
